Patched Patch Japan Imperial Flag 85 x 2 5/32in Thermoadhesive

Description

Patched Patch Japan Imperial Flag 85 x 2 5/32in Thermoadhesive
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
Designation
:
patch / patch / badge / emblem / transfer / badge
/
badge
Model
:
WWII Imperial Japan flag / Standard size
Composition
:
Polyester
Manufacturing method
:
Embroidered
Dimensions
:
8.5 by 5.5 cm
Application
:
Iron-on (to be flocked with an iron)
manual:
1.
Slightly wet the back (thin plastic layer) of the badge.
2. Place the reverse side on the fabric to be flocked.
3. Set the iron to the cotton temperature.
4. Cover the patch with a piece of fabric.
5. Apply the iron for 10-15 seconds.
6. Turn the garment over and apply the iron to the flocked surface until it dries
OR use a textile press, even better!
Designation: patch / patch / badge / emblem / transfer / badge / badge Model: WWII Imperial Japan flag / Standard size Composition: Polyester    Manufacturing method: Embroidered Dimensions: 8.5 by 5.5 cm  Application: Iron-on (to be flocked with an iron) manual:  1. Slightly wet the back (thin plastic layer) of the badge. 2. Place the reverse side on the fabric to be flocked. 3. Set the iron to the cotton temperature. 4. Cover the patch with a piece of fabric. 5. Apply the iron for 10-15 seconds. 6. Turn the garment over and apply the iron to the flocked surface until it dries OR use a textile press, even better!
Service
Armée de l'air
Pays de fabrication
Thaïlande
Objet modifié
Non
Pays, Organisation
Japon
Type
Vêtement, Uniforme
Sous-type
Patch
Période
1919-1930