Patch Patched Airborne US Army Patch Embroidered Emblem Thermoadhesive

Description

Patch Patched Airborne US Army Patch Embroidered Emblem Thermoadhesive
The description of this item has been automatically translated. If you have any questions, please feel free to contact us.
Ideal for
personalize
his clothes and accessories (bag, cap, jacket, polo shirt ...), create or repair his old or perforated clothes ...
A huge choice of models
in my ebay store !!
Designation
:
patch / patch / badge / emblem / transfer / badge
/
badge
Model
:
Airborne / Standard size
Composition
:
Polyester
Manufacturing method
:
Embroidered
Dimensions
:
8 x 6 cm
Application
:
Iron-on (to be flocked with an iron)
manual:
1.
Slightly wet the back (thin plastic layer) of the badge.
2. Place the reverse side on the fabric to be flocked.
3. Set the iron to the cotton temperature.
4. Cover the patch with a piece of fabric.
5. Apply the iron for 10-15 seconds.
6. Turn the garment over and apply the iron to the flocked surface until it dries
OR use a textile press, even better!
Ideal for personalize his clothes and accessories (bag, cap, jacket, polo shirt ...), create or repair his old or perforated clothes ... A huge choice of models in my ebay store !! Designation: patch / patch / badge / emblem / transfer / badge / badge Model: Airborne / Standard size Manufacturing method: Embroidered Application: Iron-on (to be flocked with an iron) 1. Slightly wet the back (thin plastic layer) of the badge. 2. Place the reverse side on the fabric to be flocked. 3. Set the iron to the cotton temperature. 4. Cover the patch with a piece of fabric. 5. Apply the iron for 10-15 seconds. 6. Turn the garment over and apply the iron to the flocked surface until it dries OR use a textile press, even better!
Service
Armée de l'air
Pays de fabrication
Thaïlande
Objet modifié
Non
Pays, Organisation
Etats-Unis
Type
Insigne, Décoration
Sous-type
Patch
Période
1919-1930