-40%

nEXT400D Turbomolecular Pump CF160 Inlet Flange, 160W B83200400 NEW - Open Box

$ 3695.47

Availability: 100 in stock
  • Outlet Flange: DN 25
  • All returns accepted: ReturnsNotAccepted
  • Inlet Flange: DN 160
  • Brand: Edwards Vacuum
  • Condition: New – Open box

    Description

    Brand new surplus.  Missing original packaging.  Serial number removed to prevent fraud.  Never used.
    nEXT400D Turbomolecular Pump CF160 Inlet Flange, 160W  B83200400
    The nEXT is a hybrid bearing compound turbomolecular pump. nEXT pumps combine our proven bearing technology (oil lubricated ceramic lower bearing with dry permanent magnetic upper bearing), an improved rotor design with a new molecular drag stage to deliver improved pumping speed and compression ratios, and user serviceability. They feature 24 V to 48 V d.c. sensor less motors with a built in drive that is fully compatible with our range of TAG and TIC controllers. They are available pre-set for either 80 W or 160 W maximum power, the former enabling use with our 100 W TIC controllers are also recommended for pumping Argon, but with a longer ramp time to full operating speed.
    Inlet flange
    DN160ISO-K, DN160CF
    Outlet flange
    DN25NW
    Pumping speed
    N
    2
    400 ls
    -1
    He
    390 ls
    -1
    H
    2
    325 ls
    -1
    Compression ratio
    D / T
    N
    2
    >1 × 10
    11
    He
    1 x 10
    8
    / >1 x 10
    8
    H
    2
    5 x 10
    5
    / 1 x 10
    6
    Ultimate pressure with RV backing pump ISO/CF
    <1 x 10
    -8
    / <1 x 10
    -10
    mbar
    Recommended backing pump*
    RV12/nXDS10i
    Vent port
    1/8 inch BSP female
    Purge port
    1/8 inch BSP female
    Max continuous inlet flow (Nitrogen)

    Water cooling (water at 15°C, ambient temp at 40°C)
    105 sccm
    Forced air cooled, 35 °C ambient
    90 sccm
    Pump rotational speed
    Nominal rotational speed
    60000 rpm
    Standby rotational speed
    Variable from 33000 to 60000 rpm (42000 rpm default)
    Programmable power limit settings
    Variable from 50-200W (160W default)
    Start time to 90% speed D
    / T  160 W
    175s / 200s
    Analogue outputs
    Pump rotational speed;
    Power consumption; Pump temp; Controller temp
    Cooling method
    #
    Forced air / water
    Ambient air temp for forced air cooling
    5 - 35°C
    Min cooling water flow rate (water 15°C)
    15 l h
    -1
    Water temp range
    10 - 20°C
    Max inlet flange temp
    70°C
    Operating attitude
    Vertical and upright, through to
    Horizontal +/- 2°
    Noise level at 1 metre
    <45 dB(A)
    Max magnetic field pump can tolerate
    5 mT
    Recommended controller
    TIC200 turbo and instrument controller
    Quiescent electrical power
    Typically 20 W